Other Specifications; Internal Buffer; Electrical Characteristics - Epson H6000III - TM Two-color Thermal Line Technical Reference Manual

1.6 Other Specifications

1.6.1 Internal Buffer

1. Receive buffer selectable as 45 Byte or 4 KB using the DIP switch.
2. User-defined buffer (both for user-defined characters and user-defined bit images)
Receipt: 12KB; Slip: Approximately 3KB
3. Macro buffer 2KB
4. NV (non-volatile) bit image buffer 384KB
5. NV (non-volatile) user memory 1KB

1.6.2 Electrical Characteristics

Supply voltage:
Current consumption (at
24V except for drawer
kickout driving):
Note:
The current consumption is as follows when a receipt is printed in low temperature. Take in consideration
if a power supply other than the Epson specified one is used or the print pattern is different.
Print pattern
Print duty
Current value (A) at
5C
Rev. E
+24 V 10% (optional power supply: EPSON PS-180)
Ripple voltage: 300 mVpp or less
(only when the printer is used with the MICR reader)
Slip: Operating:
Mean: Approximately 1.7A
(Character font A -N, all columns printing)
Peak: Approximately 5.5A
Receipt: Operating:
Mean: Approximately 1.8A
(Character font A -N, all columns printing)
Peak: Approximately 7.7A
Card Image Scanner:
Operating: Mean:Approximately 0.5A
Standby:
Mean: Approximately 0.2A
See figure 'A' below
18% (Alphanumeric
in full column)
Peak Mean
7.7 1.8
TM-H6000III Technical Reference Guide
Peak: Approximately 0.6A
See figure 'B' below
50%
Peak Mean
8.5 3.5
See figure 'C' below
100%
Peak Mean
9.5 5.0
General Information 1-25