Epson H6000III - TM Two-color Thermal Line Technical Reference Manual page 42

❏ The values in the table above are measured in the following conditions, but are just for your
reference.
❏ The Epson original power supply PS-180 can print within the print duty above.
❏ Contact Epson if you need more detailed information.
Environmental temperature:
Supply voltage:
Print pattern:
Measurement terminal:
Print density:
Figure 'A'
abcd
300 mm
42 columns
(Font A)
Alphanumeric rolling pattern with
full column printing
1-26 General Information
5 C {41 F}
24 V
See figures below
At the connector of the printer's power supply
Print density level 2
The print density levels 3 and 4 are higher by +15% and +30%
respectively than the value of the level 2 in the table above.
Figure 'B'
7890
300 mm
72 mm
1 dot for square
Figure 'C'
72 mm
Rev. E