Printing And Paper Specifications; Receipt Section - Epson H6000III - TM Two-color Thermal Line Technical Reference Manual

1.4 Printing and Paper Specifications

1.4.1 Receipt Section

Printing method:
Dot density:
Printing direction:
Printing width:
Paper width:
Characters per line:
Character spacing:
Print speed:
Paper feed speed:
Line spacing (default): 4.23 mm {1/6"}, programmable by control commands.
Number of characters: Alphanumeric characters: 95
Character structure:
1-4 General Information
Thermal line printing
180 dpi 180 dpi [the number of dots per 25.4 mm {1"}]
Unidirectional with friction feed
72 mm {2.83"}, 512 dot positions
79.5 0.5mm {3.13 0.02"}
42 (font A, default) 56 (font B)
0.28 mm {.01"} (2 dots) (font A, default)
0.28 mm {.01"} (2 dots) (font B)
Programmable by control command.
Normal: 63 lps maximum (computed value for 1/8" feed)
200 mm/s {7.9"/s} maximum
(at 24 V, density level 2) (lps: lines per second)
Ladder barcode/2-dimensional code printing:
118 mm/s {4.65"/s} maximum
Two-color print mode:
78 mm/s {3.07"/s} maximum
(at 24V, density level 2)
Approximately 200 mm/s {7.9"/s} continuous feeding
International characters:
Extended graphics: 128
Multilingual character model supports printing with one of the
following character sets:
Simplified Chinese (GB2312): 7580
Traditional Chinese (Big 5): 13494
Font A: 12 24 (including 2-dot spacing in horizontal)
Font B: 9 17 (including 2-dot spacing in horizontal)
Kanji: 24 24
Font A is the default
37
11 pages (including one space page)
Rev. E