Recommended Flow - Epson H6000III - TM Two-color Thermal Line Technical Reference Manual

5.1.1 Recommended Flow

The recommended flow of the Single-pass processing is shown below. It is explained for OPOS.
You need to replace it with JavaPOS or OPOS for .NET if necessary.
Setting the check scanner
Setting the AsyncMode
Check insertion &
MICR reading
Endorsement printing
Face side printing
Slip Scanning
Populating the "ImageData" property
with the scanned result
* you may execute the prescan at the check scanner's EndInsertion by "CHK_DI_ENDINSERTION_EXTENDED."
5-2 Application Development Information for UPOS
OPOSCheckScanner.DirectIO CHK_DI_CHANGE_MODE
OPOSCheckScanner.DirectIO CHK_DI_SHARPNESS_IMAGE
Specify the properties of OPOSCheckScanner
(Ex. ImageFormat)
OPOSPOSPrinter.AsyncMode = False
OPOSMICR.BeginInsertion
OPOSMICR.EndInsertion
OPOSPOSPrinter.PrintNormal
OPOSPOSPrinter.ChangePrintSide
OPOSPOSPrinter.PrintNormal
OPOSCheckScanner.BeginInsertion
OPOSCheckScanner.EndInsertion *
OPOSCheckScanner.RetrieveImage
Start
End
Rev. E