Printable Area For Slip - Epson H6000III - TM Two-color Thermal Line Technical Reference Manual

1.4.2.2 Printable Area for slip

*2 The length from the form stopper to the tip of the paper.
*3 The length from the tip of the paper to the first printing line position.
*4 The printable area after the slip BOF sensor detects the end of the paper. (The bottom margin
must be considered for a real printable area.)
*5 Bottom margin (calculated value).
Note:
Numeric values used here are typical values; consider this for the user design for the starting position in
the paper feeding direction.
1-12 General Information
Slip ejection sensor position
The first printing line position
Paper feeding
roller position
Form stopper position
TOF sensor position
Sub-paper feeding
roller position
The last printing line position
Form stopper
5
PRINT
AREA
18.4
(Min)
85.4(MAX)
68(Min)
Printable area for slip paper
23.2
85.4 5.6
37.8
BOF sensor position
5.6
(Units: mm)
4
Rev. E