1.4.6.4 Notes on Using the Card Image Scanner
❏ Notes on card
•
The side to be scanned must be up when it is inserted.
•
Make sure to use a flat card without excessive curvature, cracking, or embossing.
Otherwise, the card feeding may be affected.
•
When you use an IC card, be sure not to touch the contacts on it.
•
Since the card sensor uses a transmissive photo sensor, do not use a card with a hole or a
transmissive area in the sensor position.
❏ Quality of image data
An appropriate quality of the scanning result may not be obtained in the following cases:
•
A card that has excessive curvature, cracking, or damage.
•
A card that has embossing.
•
When excessively bright external light affects the image scanning.
•
When the glass of the image scanner is scratched by a foreign substance such as sand.
1-22 General Information
Prohibited area for a hole or
a transmissive area.
Card insertion direction
All numerical Values are typical.
[Units: mm]
Rev. E