Turn Roller Assembiy Removal; Paper-Out Actuator (Pesensor Lever) Removal - Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer Service Manual

Disassembly and Assembly
Remove the paper cassette and imaging cartridge.
1.
2. Remove the feeder assembly. (Refer toSection3.2.3.l.)
3. Remove 2 CBB screws (M3 x 8) securing the feeder tie plate, and remove it.
4. Remove 2 CBB screws (M3 x 8) and 2 CB screws (I@ x 8) securing the feed housing (right) and
remove it.
5. Remove 1 E-ring (left) securing the turnroller assembly and remove it.
Figure 3-19. Removing the Turn Roller Assembly
3.2.3.7 Paper-out Actuator(PE Sensor Lever) Removal
1. Remove the paper cassette and irnagingcartridge.
2. Remove the feeder assembly. (Refer toSection 3.23.1.)
3. Remove 2 CBB screws (M3 x 8) securing the feeder tie plate, and remove it.
4 . Rernove2CBB ~rews (M3x8)and 2~~ews (~
remove it.
5. Remove 1 link securing the paper-out actuator.
6. Remove thepaper~ut actuator fromhookholding it.
3-14
the feed housing (right) and
Link
'
Rev. A