Maintenance
Manual
Charge
Wire Cleaning
If the printer begins to print black lines, clean the charge wire as follows:
I
Figure
Charge Wire Cleaning (1)
6-2.
layer.
2.
Locate the three layers in the imaging cartridge and the bur slots in the middle
into the slot as fir as it will go and
3.
each slot in the middle layer by pushing the tool
moving it several times from side to side, as shown in Figure 6-3.
Figure
Charge Wire Cleaning (2)
&3.
4. When
you finish cleaning all four slots in the middle layer, reinstall the imaging cartridge m
the printer.
6-2
Rev. A