Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer Service Manual page 141

Maintenance
holding the imaging cartridge, carefully slide the plastic mmer on either side of the
6. While
far as it will go.
Figure 6-6. Imaging Cartridge Replacement (3)
7. Close the printer and gently press the top of the case until the latch ciicks shut, as shown m
Figure 6-7.
Figure 6-7. Imaging Cartridge Replacement (4)
8.
Turn on the printer. WARMING UP and IUVER FULL? appear alternately on the display for
10 seconds. Press
about
display.
Note: You must
press
option m SelecType will register correctly.
that the TONER
After READY appears on the display, press
9.
once. TEST MENU then appears.
10. Press Item several times until CLEANING PAPER appears. Then press
Put a sheet of standard
11.
Continue. CLEANING
6-4
while these messages appear. READY then appears on the
Enter
Enter while the WARMING UP and TONER FULL? messages
Menu once
A4 paper with the long edge &t into the MS] tray and then press
PRINT flashes on the display as the printer pMts and feeds the paper.
and then press
ALT and Menu together
Enter.
appear, so
. .
Rev. A