Feed Solenoid Removal; Turn Solenoid Removal - Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer Service Manual

Disassembly and Assembly

3.2.3.2 Feed Solenoid Removal

Remove the paper cassette and imaging cartridge.
1.
2. Remove the feeder assembly. (Refer to Section 3.2.3.1.)
3.
Remove 2 CBB saews (M3 x 8) securing the feeder tie plate, and remove it.
4.
Remove 2 CBB screws (M3 x 8) and 2 CB saews (M3 x 8) securing the feed housing (right),
and remove it.
Remove the GEAR IN and GEAR OUT.
5.
6. Di sconnect connector P/J201 from the FEEDER PWB board.
7.
Remove 1 CB saew (M3 x 8) securing the feed solenoid, and remove it.
Figure 3-15. Removing the Feed Solenoid

3.2.3.3 Turn Solenoid Removal

1. Remove the paper cassette and imaging cartridge.
2. Remove the feeder assembly. (Refer to Section 3.2.3.l.)
3. Remove 2 CBB saews (M3 x 8) securing the feeder tie plate, and remove it.
4. Remove 2 CBB screws (M3 x 8) and 2 CB saews (M3 x 8) securing the feed housing (right),
and remove it.
5. Remove the GEAR IN and GEAR OUT.
6.
7. Remove 1 CB sinew (M3 x 8) securing the turn solenoid, and remove it.
Figure 3-16. Removing the Turn Soienoid
3-12
Service
Manual
01
Rev. A