Service Manual
Heater Removal
3.2.5.5
Never touch the heater with your bare hands
1.
Remove the top cover. (Refer to Section 3.2.1.2.)
Remove the fusing unit. (Refer to Section 3.2.5.1.)
2.
3
Remove 2 CBB screws (M3 x 8) securing the fusing unit top cover, and remove it.
Remove the eject chute. (Refer to Section 3.2.5.3.)
4.
5.
Remove 2 CBB screws (M3 x 8) securing the fusing unit cover R, and remove it.
6.
Remove 2 CBB screws (M3 x 8) securing the fusing unit cover L, and remove it.
7.
Remove the sensor cover and remove 1 CP(S-P1)
remove the thermistor.
8.
Remove 1 CBB screw (M3 x 8) securing the earth wire.
9.
Remove 1 CP(S-P1) screw (M3 x 6) securing connector P/JIOl.
10.
Remove 2 CBB screws (M3 x 8) securing comector P/JIOl.
11.
Remove 1 CP screw (M3 x 6) securing the heater, and remove it.
Sensor Cover
Rev. A
Figure 3-41. Removing the Heater
Disassembly and Assembly
saew
3-25