Feed Roller Assembly Removal; Feed Roller Removal - Epson EPL-9000 Service Manual

Service Manual

3.2.3.4 Feed Roller Assembly Removal

Remove the paper cassette and imaging cartridge.
1.
2. Remove the feeder assembly. (Refer
3. Remove 2 screws
4. Remove 2 screws
and remove it.
5. Remove the GEAR IN and GEAR OUT.
6. Remove the E-ring (left) securing the feed roller assembly, and remove it.
Figure 3-17. Removing the Feed Roller Assembly

3.2.3.5 Feed Roller Removal

1. Remove the paper cassette and imaging cartridge.
2. Remove the feeder assembly. (Refer to Section 3.2.3.1.)
3. Push the plastic face of the feed roller while holding the shaft of the feed roller assembly, and
remove the feed roller from the assembly.
Rev.
x 8) securing the feeder tie plate, and remove it.
x 8) and 2 screws
Figure 3-18. Removing the Feed Roller
Disassembly and Assembly
3.2.3.1.)
x securing the feed housing (right),
8)
3-13