Service Manual
3.2.3 Feeder Assembly Removal and Disassembly
section describes how to remove and disassemble the feeder assembly.
This
Feeder Assembly Removal
3.2.3.1
Remove the paper cassette and imaging cartridge.
1.
2. Turn the left cover over.
Place the left cover on a SOP cloth, so that it will not be damaged.
Remove 4 CB screws (M3 x 8) securing the feeder assembly from the back side, and remove it.
3.
comector P/Jl15 from the FEEDER PWB board.
Discomect
4.
Figure 3-14. Removing the Feeder Assembly
Rev. A
Disassembly and Assembly
PIJ115
3-11