Thermostat Removal
3.2.5.7
Remove the top cover. (Refer to Section 3.2.1.2.)
1.
Remove the fusing unit. (Refer to Section 3.2.5.1.)
2.
Remove 2 CB screws (M3 x 6) securing the inlet chute at the bottom of the fusing unit, and
3.
remove the inlet chute.
Remove 2 CBB screws (M3 x 8) securing the fusing unit top cover, and remove it.
5.
Remove 2 CBB screws (M3 x 8) securing the fusing unit cover R, and remove it.
6.
Remove 2 CBB screws (M3 x 8) securing the fusing unit cover L, and remove it.
Remove the pressure roller. (Refer to Section 3.2.5.2.)
7.
Remove the eject chute. (Refer to Section 3.2.5.3.)
8.
Remove the heater. (Refer to Section 3.2.5.5.)
9.
Remove the heat roller. (Refer to Section 3.2.5.6.)
10.
11.
Remove 2 CP(S-P1) screws (M3 x 6) securing the thermostat, and remove it.
Figure 3-43. Removing the Thermostat
Rev. A
Disassembly and Assembly
3-27