Star Wheel Roller Unit Removal - Epson Stylus PHOTO 950 Service Manual

EPSON Stylus PHOTO 950

4.2.7 Star Wheel Roller Unit Removal

1. Remove the Carriage Unit. (Refer to Section 4.2.6.)
2. Remove the Ink System Unit. (Refer to Section 4.2.4.)
3. Disengage the cable that is secured to the left end of the star wheel roller unit from
the hook.
Figure 4-48. Releasing the Cables
4. Remove the four screws 6) C.B.S 3x6 that are securing the Star Wheel Roller Unit.
4
2
Star Wheel Roller Unit
Figure 4-49. Screws Securing the Star Wheel Roller Unit
DISASSEMBLY AND ASSEMBLY
Hook
6) C.B.S 3x6
1
When installing the star wheel roller, the screws should be
C A U T I O N C A U T I O N C A U T I O N
installed in the order shown in Figure 4-49.
5. Push the left and right sides of the printer mechanism to widen it, and then remove
the star wheel roller from the right side while pivoting it on the left side.
3
Disassembly
Revision A
116