Warnings, Cautions And Notices - Eaton Cutler-Hammer SPI9000 User Manual

SPI9000 Inverter Unit FI9 – FI14 User Manual

Warnings, Cautions and Notices

Read this manual thoroughly and make sure you understand the procedures before you
attempt to install, set up, or operate this Cutler-Hammer
electrical business.
Warnings
vi
Only a competent electrician may carry out the electrical
installation.
The components of the power unit of the inverter are live when the
SPI9000 inverter is connected to DC supply. Coming into contact
with this voltage is extremely dangerous and may cause death or
severe injury. The control unit is isolated from mains potential.
The supply and motor terminals are live when the inverter is
connected to DC supply, even if the motor is not running.
The control I/O-terminals are isolated from the mains potential.
However, the relay outputs and other I/O-terminals may have
dangerous control voltage present even when the inverter unit is
disconnected from the DC supply.
The inverter has a large capacitive leakage current.
If the inverter is used as a part of a machine, the machine
manufacturer is responsible for providing the machine with a main
switch (EN 60204-1).
Only spare parts delivered by Eaton can be used.
For more information visit: www.EatonElectrical.com
®
SPI9000 Inverter Unit from Eaton's
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
September 2006
MN04004002E