Eaton Cutler-Hammer SPI9000 User Manual page 10

SPI9000 Inverter Unit FI9 – FI14 User Manual
Grounding and ground fault protection
The SPI9000 inverter must always be grounded with a ground conductor connected to the
ground terminal.
The ground fault protection inside the inverter only protects the inverter against ground
faults in the motor or the motor cable.
Due to the high capacity currents present in the inverter, fault current protective switches
may not function properly. If fault current protective switches are used, they need to be
tested with ground fault currents present during possible fault situations.
Motor and Equipment Safety
viii
Before starting the motor, check that the motor is mounted properly
and ensure that the machine connected to the motor allows the
motor to be started.
Set the maximum motor speed (frequency) according to the motor
and the machine connected to it.
Before reversing the motor, make sure that this can be done safely.
Make sure that no power correction capacitors are connected to the
motor cable.
Make sure that the motor terminals are not connected to mains
potential.
For more information visit: www.EatonElectrical.com
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
September 2006
MN04004002E