Figure 5-10: Fault History Menu - Eaton Cutler-Hammer SPI9000 User Manual

SPI9000 Inverter Unit FI9 – FI14 User Manual
System Menu (M6)
You can enter the System menu from the Main menu by pressing Menu Button Right when
the location indication M6 is visible on the first line of the keypad display.
The controls associated with the general use of the inverter, such as application selection,
customized parameter sets or information about the hardware and software are located
under the System menu. The number of submenus and subpages is shown with the symbol
S (or P) on the value line.
Table 5-10 has a list of the functions available in the System menu.
5-14
Fault history
H1 H3

Figure 5-10: Fault History Menu

For more information visit: www.EatonElectrical.com
5 ChargeSwitch
11 Output phase
T1 T7
PUSH to Reset
September 2006
Operation hours
13:25:43
Operation days
17
MN04004002E