Installing A Battery; Replacing A Daughter Card Modem - Dell SmartStep 100N Owner's Manual

58
Replacing Pa rts
1

Installing a Battery

Ensure that the battery lock is in the unlocked position.
1
Slide the battery into the battery bay until the latch clicks.
2
Lock the battery.
3

Replacing a Daughter Card Modem

Make sure that the work surface is flat and clean to prevent scratching
1
the computer cover.
Save and close any open files, exit any open programs, and shut down
2
the computer (see page 20).
Disconnect the computer from the electrical outlet.
3
Wait 10 to 20 seconds and then disconnect any attached devices.
4
Remove any installed PC Cards, battery, and devices.
5
To ground yourself, periodically touch an unpainted metal surface on
6
the back of the computer while you work.
Handle components and cards by their edges, and avoid touching pins
7
and contacts.
2 3