Enabling Hibernate Mode - Dell SmartStep 100N Owner's Manual

Enter your name and organization in the Personalize Your Software
9
screen, and then click Next.
If you are reinstalling Windows XP Home Edition, enter a name for your
10
computer when the Computer Name window appears, and then click
Next.
If you are reinstalling Windows XP Professional, enter a name for your
computer and a password when the Computer Name and
Administrator Password window appears, and then click Next.
If you have a modem installed, the Modem Dialing Information
11
screen appears. Enter the requested information and click Next.
Enter the date, time, and time zone in the Date and Time Settings
12
window and click Next.
Windows XP begins to install its components and configure the
computer. The computer automatically restarts.
When the Welcome to Microsoft screen appears, click the green arrow
13
icon at the bottom of the screen to continue. Then follow the
instructions on the screen to complete the installation.
Remove the CD from the drive.
14
Reinstall the appropriate drivers (see page 41).
15
Reinstall your virus protection software.
16

Enabling Hibernate Mode

Click the Start button, point to Settings, and then click Control
1
Panel.
Double-click the Power Management icon.
2
Click the Hibernate tab.
3
Ensure that Enable hibernate support is selected, and click Apply.
4
Click OK to close the Control Panel.
5
Solving Pr oblems 49