Connecting A Printer; Parallel Printer - Dell SmartStep 100N Owner's Manual

HINT: For complete
printer driver installation
instructions, refer to your
printer documentation.
16
Setting Up

Connecting a Printer

See the documentation that came with the printer for any recommended
preparation procedures, such as:
• Removing the packaging
• Installing the toner or ink cartridge
• Loading paper
Then follow the instructions that came with the printer to connect it to the
computer. If no information is provided, see the following sections.

Parallel Printer

Turn off the computer (see page 20).
1
NOTICE: Use only a standard parallel cable measuring 3 m (10 ft) or less to
connect the printer to the computer. Use of a nonstandard cable may prevent
the printer from working.
Attach the parallel printer cable to the parallel connector on the
2
computer and tighten the two screws. Attach the cable to the parallel
connector on the printer and snap the two clips into the two notches.