Eagle CUDA 350 S/MAP Installation And Operation Instructions Manual page 116

ates a trail by placing a trail point on the screen every time you change
directions. (The methods used for creating a trail and the trail update
rate can be adjusted or even turned off. See Sec. 8 for Trail Options.)
To preserve a trail from point A to point B, you must turn off the trail
by making it inactive before heading to point C or even back to point A.
When the current trail is set inactive, the unit automatically begins
recording a new trail.
To Save a Trail
1. Press | |↓ to | .
MENU MENU M T ENT
Y RAILS
Visible
Active
symbol
symbol
Sequence for saving a trail and beginning a new one. My Trails com-
mand (left). The Trails Menu (center). The arrow to the right of Trail 3
indicates the trail is active and the check to the left indicates the trail
is visible on the map display. The Edit Trail menu (right) with the
Name command selected.
2. Press ↓ to the Active Trail Name| .
ENT
3. Press ↓ to | . This unchecks the Active option.
A ENT
CTIVE
4. To return to the previous page, press repeatedly. As you left the
EXIT
Edit Trail menu, you will notice that a new trail was started with a
new sequential number. In the example figure below, the new trail is
number 15, showing zero points. Note that Trail 14 is inactive, but is
still visible on the map.
108