Power/Lights On And Off - Eagle CUDA 350 S/MAP Installation And Operation Instructions Manual

ARROW KEYS – These keys are used to navigate through the menus,
make menu selections, move the map cursor and sonar chart cursor
and enter data.
ENT – The Enter key allows you to save data, accept values or execute
menu commands. It is also used to create event marker icons.
EXIT – The Exit key lets you return to the previous screen, clear data
or close a menu.
WPT – The Waypoint key is used to save and recall waypoints, search
for waypoints and access the waypoint list. It's also involved in some
navigation functions.
ZOUT (Zoom Out) – This key lets you zoom out the screen. On the So-
nar Page, it will allow you to see the full sonar chart display, showing
the entire water column from surface to bottom. On the Full Map dis-
play, this lets you see a larger geographic area on the display. Less de-
tail is seen as you zoom out.
ZIN (Zoom In) – This key lets you zoom in the screen. On the Sonar
Page, it enlarges fish signals and bottom detail. On the Full Map dis-
play, zooming in lets you see greater detail in a smaller geographic
area on the display.

Power/lights on and off

To turn on the unit, press . When the unit is powered up, the Full
PWR
Map GPS Page will be displayed. To switch between Sonar and Map
|← →. To select a page, press ↓ ↑ to the Page
page options, press
PAGES
Name| .
ENT
To turn on the backlight, press again. The unit has four backlight
PWR
levels to select from. Repeatedly pressing will cycle through the
PWR
backlight settings and turn off the backlight.
Turn off the unit by pressing and holding the key for 3 seconds.
PWR
88