Eagle CUDA 350 S/MAP Installation And Operation Instructions Manual page 136

1. Press |→ to
WPT
2. Press ↓ to
A
3. Wait while the unit takes points to average the position. The greater
the number of points, the greater the accuracy. When the desired number
of points accumulate, press
4. The Edit Waypoint menu appears. You can save the waypoint by
pressing
EXIT
Set a Waypoint by Projecting a Position
This feature sets a waypoint at a specific distance and bearing from a
reference position. The reference position can be selected from your
waypoint list, a map feature or from the Points of Interest list.
1. Press |→ to
WPT
2. Press ↓ to
P
3. Press ↓ to
menu with three options: My Waypoints, Map Places and Highway Ex-
its. Highlight the desired category and press
will appear. Choose the desired option: Find by Nearest or Find By
Name and press
When the point has been selected, press
pears as the reference position.
4. Press ↑ to
D
press → to the next character and repeat until the distance is correct.
Press .
ENT
5. Press ↓ to
press → to the next character and repeat until the bearing is correct.
Press .
ENT
6. Press ↓ to
save the new projected waypoint by pressing
waypoint. Press
|
N ENT
EW
P
VERAGE OSITION
ENT
or you can edit the waypoint.
|
N ENT
EW
P
ROJECTED OSITION
S R
ET EFERENCE
. Use ↑ ↓ to select a waypoint or map feature.
ENT
| . Use ↑ ↓ to change the first character, then
ENT
ISTANCE
. Use ↑ ↓ to change the first character, then
|
B ENT
EARING
| . The Edit Waypoint menu appears. You can
P ENT
ROJECT
to navigate to the new waypoint.
ENT
.
| |↑ to
ENT C
REATE
to create and save the waypoint.
.
| |↑ to
ENT C
| , which will launch the Select Point
ENT
128
| .
ENT
| .
ENT
REATE
. The Find By menu
ENT
| and its position ap-
ENT ENT
or you can edit the
EXIT