Map Detail Category Selection - Eagle CUDA 350 S/MAP Installation And Operation Instructions Manual

By default, your position is shown using the WGS-84 datum. It, how-
ever, can show your position using any of 191 different datums. To
change the datum:
1. Press
MENU
2. Use ↓ ↑ to select the desired datum, then press
3. To return to the main page display, press
A list of the datums used by this unit is in the back of this manual.
GPS Setup Menu (left) with Map Datum Menu (right).

Map Detail Category Selection

This menu determines which mapping features are shown on the
screen. This includes waypoints, trails, icons, cities, highways, etc. You
can selectively turn on or off any of these items, customizing the map to
your preferences.
To get to Map Categories:
1. From the Map Page, press
2. Use ↑ ↓ to select a category, then press → to cycle through available
subcategories. Press
on (check) or off (unchecked).
3. To return to the main page display, press
| |↓ to
MENU GPS S
to turn the selected category or subcategory
ENT
| |↓ to
ENT
ETUP
|↓ to
MENU M
AP
141
D S
ATUM ELECTION
.
ENT
repeatedly.
EXIT
|
C ENT
ATEGORIES
| .
EXIT EXIT
| .
ENT
.