Eagle CUDA 350 S/MAP Installation And Operation Instructions Manual page 19

4. The wait message disappears and the unit begins showing navi-
gation information along the trail. Now, begin moving and follow
your unit's directions.
Translated into complete English, step 1 above would mean: "Start on the
Plotter Page. Press the Menu key twice. Next, repeatedly press (or press
and hold) the down arrow key to scroll down the menu and select (high-
light) the My Trails menu command. Finally, press the Enter key."
Step 2 would mean: "Press the down arrow key repeatedly to scroll to
the trail named Trail 1, and press Enter. Next, press the right arrow
key and then the down arrow key to highlight the Navigate command,
then press Enter."
11