Eagle CUDA 350 S/MAP Installation And Operation Instructions Manual page 67

ting. For example, if you set the shallow alarm to 10 feet, the alarm
will sound a tone if the bottom signal is less than 10 feet. It will con-
tinue to sound until the bottom goes deeper than 10 feet. The deep
alarm works just the opposite. It sounds a warning tone if the bottom
depth goes deeper than the alarm's setting. Both depth alarms work only
off the digital bottom depth signals. No other targets will trip these
alarms. These alarms can be used at the same time or individually.
Sonar Alarms selected from main menu (left).
To adjust and turn on the shallow alarm:
1. Press
MENU
2. Press ↓ to
S
3. Press ↑ or ↓ to
4. Press ↑ to
S
5. Use ↑ ↓ to change the first digit, then press → to the next digit. Re-
peat these steps until you have entered the desired depth and press
.
ENT
To switch to a different depth setting, open the Sonar Alarms menu
and repeat the instructions in steps 4 and 5 above.
The Sonar Alarms menu (right).
| |↓ to
MENU A
|
A ENT
ONAR LARMS
S A
HALLOW LARM
|
D
HALLOW EPTH
| .
ENT
LARMS
.
and press
E
NABLED
.
ENT
59
.
ENT