Alarms; Depth Alarms - Eagle CUDA 350 S/MAP Installation And Operation Instructions Manual

Sonar Features selected (left). In the Sonar Features menu, Noise Rejec-
tion is selected with ASP in the default low setting (right).
To change the ASP level:
1. From the Sonar Page, press |↓ to | .
MENU S F ENT
ONAR EATURES
2. Press ↓ to | .
N R ENT
OISE EJECTION
3. Press ↓ or ↑ to select a setting, then press
.
ENT
4. To return to the previous page, press | .
EXIT EXIT

Alarms

This unit has three different types of sonar alarms. The first is a Fish
Alarm. It sounds when the Fish I.D.™ feature determines an echo is a
fish.
Another alarm is the Zone Alarm, which consists of a bar on the side of the
screen. Echoes that appear inside the range of the bar trigger the alarm.
The last alarm setting is the Depth Alarm, which has both a Shallow
and a Deep setting. Only the bottom signal will trigger this alarm. This
is useful anchor alert, a shallow water alert or for navigation.

Depth Alarms

The depth alarms sound a tone when the bottom signal goes shallower
than the shallow alarm's setting or deeper than the deep alarm's set-
58