Saving Optimal Settings For The Current Media (Print Media Settings); Parameters Stored In Media Setting Banks; Saving Settings - Epson SureColor SC-S70600 User Manual

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
❏ Check the amount of ink remaining:
If ink is expended during printing, printing can be
resumed once the affected cartridge has been
replaced. However, when replacing ink during a
print job, you may see a difference in color
depending on the drying conditions. If you know
that the print job will be a large one, we recommend
that you use new cartridges to replace those that are
running low before you start. The old cartridges can
be reinserted and used at a later date.
Ink level is shown by an icon. U
the Display" on page 20
Replacing Ink Cartridges U
page 92
❏ Agitating white and metallic silver Inks
White and metallic silver inks must be removed and
shaken once every 24 hours. Although a message is
displayed in the control panel 24 hours after the
inks were last removed, we recommend that they be
removed and shaken before the start of work.
Shaking ink cartridges U
page 92
❏ Print Check Pattern
Print a check pattern to check for clogged nozzles.
Perform head cleaning if parts of the pattern are
faint or missing.
Print a Check Pattern U
nozzles" on page 75
Head Cleaning U "Head Cleaning" on page 77
Saving Optimal Settings
for the Current Media
(Print Media Settings)
A variety of media settings can be optimized for the
current media and stored in the printer.
Once frequently used settings have been stored in a
media setting bank, it can be recalled to instantly
optimize multiple parameters.
Basic Operations
"Understanding
"How to replace" on
"How to replace" on
"Checking for clogged
61
The printer offers a total of 30 media setting banks.
This section describes how to create media setting banks
and the settings that can be stored.
Parameters Stored in Media
Setting Banks
Media setting banks store the following:
❏ Setting Name
❏ Feed Adjustment
❏ Platen Gap
❏ Head Alignment
❏ Heating & Drying
❏ Media Suction
❏ Head Movement
❏ Multi-Strike Printing
❏ Roll Type
❏ Tension Measurement
❏ Media Tension
❏ Feed Speed
For more information on these items, see U
Media Setup Menu" on page

Saving Settings

Follow the steps below to save media settings.
"The
100.