EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
I
Rotate the handle until part A in the illustration
below is fully inserted.
c
Important:
Once part A is hidden, do not turn the handle
any further. Failure to observe this precaution
could damage the roll holder.
If part A is not hidden even after turning the
handle until it can no longer be turned, return
to step 7 and fully press the right unit into the
roll core.
J
Raise the media loading lever.
Basic Operations
K
Pull out the media and insert it into the printer.
Note:
Media that is heavy and difficult to unroll can be
fed by pressing the drive switch on the left roll
holder.
Printable Side Out
Printable Side In
L
Insert the media past the pressure rollers and
lower the media loading lever to hold it in place.
M
Go to the front of the printer and open the front
cover.
40