EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
A: Pressure rollers (low)
*1 The value selected for Side Margin(Left) in the setup menu. The default value is 5 mm.
Choose a Side Margin(Left) over 10 mm when using media holding plates.
*2 The total of the values selected for Print Start Position and Side Margin(Right) in the setup menu. The default value is 5 mm.
Choose a Print Start Position or Side Margin(Right) over 10 mm when using media holding plates.
Note:
The margins may not conform to the values selected in the document (or application). If the value selected for Side Margin or
Print Start Position is changed, documents that fill the printable area will not be printed to the full width of the media.
SC-S30600 series
The gray area in the illustration below shows the printable area. The arrow indicates the feed direction.
A
The positions of items
A
(right edge of media)
Varies with the option selected for Media Size Check.
On selected for Media Size Check: The right edge of the media.
Off selected for Media Size Check: The default right edge reference position (as far as the platen past the center of
the label on the pre-heater).
B
(left edge of media)
Basic Operations
B
to
are as follows:
72