EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
"Using the Auto Take-up Reel Unit" on
U
page 55
Note:
If you would prefer to print from the very start of the
roll, press the u button in the control panel to
rewind the media slightly.
Be sure, however, to stop rewinding before the
leading edge of the media is over the cutter groove
(on the pressure roller side).
Basic Operations
S
Attach the media holding plates at either side of
the media.
First, position the plates so that the edges of the
media are in the centers of the round holes. Next,
adjust the position until the white line is visible in
the square window and push the plates down to
lock them in place and keep them from lifting.
42