(c) When using included mounting brackets (impact resistance test specifications)
Impact acceleration:
Operation time:
Direction, count:
Point of impact:
Note: See Appendix M if impact may possibly be applied in X direction.
(5)
Acoustic noise
(a) Operation noise
Test conditions:
Test method:
Measuring result:
Note: Measured value fluctuates depending on the paper used and the print conditions (print pattern, print
speed, print density, etc.).
(6)
Altitude
3000m or less
1.14
Installation
Install in a level place.
See Appendix M for details.
1.15
Interface
1.15.1
Interfaces equipped
Note: For details about printing on models equipped with multiple interfaces, see 3.13 Printing Using Multiple
Interfaces.
Standard, for specified customer
USB interface
RS-232 serial interface
Approximately 147 m/s² {15 G}
11 ms
1 time each in Y, Z directions
Unit installation point
X direction
Figure 1.13.2 Direction of Impact
Epson standard
Epson standard
Approx. 60 dB (Bystander position)
Z direction
Y direction
15