Reducing Image Noise (Noise Reduction); Dynamic Gamma Adjustment - Canon WUX450 User Manual

Reducing Image
Noise
(Noise reduction)
> [Image adjustment] > [Advanced
[Noise reduction]
adjustment] >
HDMI Component
Digital PC Analog PC
You can reduce image noise.
Off Disables noise reduction.
Weak Specifies the intensity of the noise
Middle reduction in three steps.
Strong
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default for HDMI (when [HDMI
In] (P115) is set to [Auto]) is [Off] and when
Component is used, it is set to [Weak].
• Image resolution may seem lower when
noise reduction is applied.
• Select [Weak] for fast-moving images.
Select [Strong] for slow-moving images.
• The adjustment you have made is stored as
adjusted values for the input signals and
image mode of the current projection.
• When [HDMI In] (P115) is [Computer], this
setting is not displayed.
Adjusting Image Quality (Image Adjustment)
Dynamic Gamma
Adjustment
> [Image adjustment] > [Advanced
adjustment] >
HDMI
Digital PC
LAN
USB
You can adjust the gradation
representation of light and dark
portions of an image automatically.
Off
Weak
Middle
Strong
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default settings are [Off] when
the connected equipment is a Computer
(ANALOG PC, DIGITAL PC, HDMI (when
[HDMI In] (P115) is [Computer])) and
[Weak] when the connected equipment is
AV equipment (COMPONENT, HDMI (when
[HDMI In] (P115) is [Auto])).
• The adjustments you have made are stored
as adjusted values for the input signals and
image mode of the current projection.
103
[Dynamic gamma]
Component
Analog PC
Dynamic gamma is disabled.
Specifies the intensity of the
dynamic gamma in three steps.
LAN
USB