The Roll Is Empty - Canon imagePROGRAF iPF6100 User Manual

Messages regarding paper

The roll is empty.

There is no more paper left on the roll.
Roll feed unit err
The Roll Feed Unit is not working.
No Roll Feed Unit.
The printer has received a print job that species
rolls, but the Roll Feed Unit is not installed.
700 Error Message
Cause
Cause
Cause
Corrective Action
Follow the steps below to replace the used roll with a
new roll of the same type and size.
1.
Remove the roll.
(→P.122)
(→P.118)
2.
Load the new roll.
(→P.119)
3.
If no barcode was printed on the roll, specify the
paper type.
(→P.124)
4.
If no barcode was printed on the roll, specify the
paper length.
(→P.125)
Corrective Action
Turn off the printer, remove the Roll Feed Unit
momentarily, and then reinstall it.
(→P.147)
(→P.148)
If the message is still displayed after you do this,
contact your Canon dealer for assistance.
Corrective Action
Install the Roll Feed Unit and resend the print job.
(→P.148)