Configuring Netware Network Settings - Canon imagePROGRAF iPF6100 User Manual

Network Setting (Windows)
Conguring NetWare Network Settings
To print over a NetWare network, congure the network environment as follows.
Important
•
To congure network settings, you must be logged in with administrative rights such as "Administrator"
account. We recommend that your network administrator congure the network settings.
1.
Specify the Ethernet frame type for communication between the printer and computers.
For instructions, see "Specifying the Printer's Frame Type". (→P.559)
2.
Specify the NetWare print services, including the print server and queue.
For instructions, see "Specifying NetWare Print Services". (→P.561)
3.
Specify NetWare protocol details besides the frame type.
For instructions, see "Specifying NetWare Protocols". (→P.564)
After you have completed the steps above, congure each computer for printing over the
NetWare network.
4.
Connect to the NetWare network.
Install NetWare client software on each computer to be used for printing over the network, and
log in to the NetWare server or tree. For instructions on connection, refer to the NetWare and
operating system documentation.
5.
Install the printer driver.
Follow the instructions of your network administrator to install the printer driver on each computer
to be used for printing. When installing the printer driver, choose Network Printer as the printer
destination, and then choose the print queue created from the NetWare print service settings.
6.
Follow these steps to congure the printer port.
1.
Open the Printers and Faxes (or Printers ) window.
2.
Right-click the printer icon and choose Properties.
3.
Click the Port (or Advanced ) tab to display the Port (or Advanced ) sheet.
4.
As the destination port, specify the print queue created by conguring the NetWare print service
settings.
Note
•
This step is not necessary if you specied the printer destination during installation of the printer
driver.
566 Network Setting