Messages regarding paper
Papr Size Mismatch
The paper size as specied on the
printer does not match the size
specied in the printer driver.
This paper cannot be used.
Check supported paper sizes.
The loaded paper is too large for the printer.
The loaded paper is too small for the printer.
Paper has been loaded that is too small to print
the test pattern for printhead adjustment or nozzle
checking.
692 Error Message
Cause
If you have selected Fit Roll Paper
Width in the printer driver settings
and Warning in Detect Mismatch
in the printer menu:
If you have selected Fit Roll Paper
Width in the printer driver settings
and Pause in Detect Mismatch in
the printer menu:
Cause
Printing resumes after the warning
message is displayed. However,
note that this error may cause
paper jams and affect the printing
quality. Try printing again after
adjusting the paper size as
specied in the printer driver and
the size specied on the printer so
that they match.
Follow the steps below to ensure
the paper size matches on the
printer and in the printer driver.
1.
Hold down the Stop button for
a second or more to cancel
printing.
2.
Load paper of the same size as
you have specied in the printer
driver.
3.
Change the paper size in the
printer driver and try printing
again.
Press the Online button to resume
printing.
However, this may cause a paper
jam or printing problem.
Corrective Action
Load paper of the correct size.
(→P.113)
Load paper of the correct size.
(→P.113)
Load unused paper A4/Letter-sized or larger. More
than one sheet may be required depending on the
adjustment.
Corrective Action