Playing Tv Audio Only; Changing Channel Settings; Automatically Scanning For Channels - Dynex DX-L32-10A User Manual

Changing channel settings

Playing TV audio only

You can turn off the picture on your TV and listen to only the program
audio.
To play only the TV audio:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Setup, then press . The Setup menu
opens.
Parental Controls
3 Press or to highlight Audio Only, then press
select On.
4 Press EXIT to close the menu.
Notes:
Audio Only works only when the input source is TV and your TV is
receiving a broadcast signal.
To exit Audio Only mode, press any button. When you exit Audio Only
mode, the Audio Only option is automatically reset to Off.
Changing channel settings

Automatically scanning for channels

To auto scan for channels:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Channel, then press . The Channel
menu opens.
3 Press or to select Air or Cable.
19
or to