Remote Control - Dynex DX-L32-10A User Manual

TV components

Remote control

No. Button Description
1 Press to turn on the TV or put the TV
POWER
in standby mode.
Caution: When the TV is in standby
mode, power is still flowing into the
TV. To disconnect power, unplug the
power cord.
2 COMP Press once to select a device
connected to the COMPONENT IN 1
jacks.
Press twice to select a device
connected to the COMPONENT IN 2
jacks.
3 HDMI Press once to select the device
connected the HDMI 1 jack.
Press twice to select the device
connected the HDMI 2 jack.
Press three times to select the device
connected the HDMI 3 jack.
No. Button Description
4 Press the number buttons to enter
Numbers /
channel numbers or the parental
control password.
Press
sub-channel number.
For more information, see "Selecting
a channel" on page 15.
5 INPUT Press to open the INPUT SOURCE
menu. For more information, see
"Selecting the video input source" on
page 14.
6 VOL+ / VOL– Press to increase or decrease the
volume.
7 MENU Press to open the on-screen menu.
8
Press
on-screen menus.
Press
on-screen menus or to adjust menu
settings.
9 ENTER Press to confirm selections in
on-screen menus or to open
sub-menus.
10 GUIDE Press to open a program guide (if
available) when watching a DTV
program. The guide may provide
program broadcast times and
program names. For more
information, see "Displaying
additional information" on page 16.
11 MTS/SAP In analog TV mode, press to select
STEREO, SAP (secondary audio
language), or MONO.
In digital TV mode (DTV), press to
select the audio track. For more
information, see "Selecting the audio
mode" on page 18.
12 CCD Press to turn closed captioning on or
off. For more information, see
"Turning closed captioning on or off"
on page 26.
13 ZOOM Press to select the screen aspect ratio.
For more information, see "Adjusting
Advanced Video settings" on page
17.
14 FAVORITE Press to open the favorite channel
list. For more information, see
"Setting up a favorite channel list" on
page 21.
15 VIDEO Press once to select the device
connected to the AV1 IN jacks.
Press twice to select the device
connected to the AV2 IN jacks.
Press three times to select the device
connected to the S-VIDEO jack.
For more information, see "Selecting
the video input source" on page 14.
16 TV Press to select TV as the video input
source. For more information, see
"Selecting the video input source" on
page 14.
17 RECALL Press to go to the last viewed
channel. For more information, see
"Selecting a channel" on page 15.
7
to enter a digital
or to move up or down in
or to move left or right in