Connecting An S-Video Device; Connecting A Computer - Dynex DX-L32-10A User Manual

12

Connecting an S-Video device

Note: The AV1 VIDEO and S-VIDEO jacks share the same L and R AUDIO
jacks.
To connect an S-Video device:
1 Connect one end of an S-Video cable (not included) to the
S-VIDEO jack on the back of the TV, then connect the other end
of the cable to the S-VIDEO OUT jack on the S-Video device.
Back of TV
Audio cable
2 Connect one end of an audio cable (not included) to the
AV1 IN L and R AUDIO jacks on the back of the TV, then connect
the other end of the cable to the AUDIO OUT jacks on the S-Video
device.
To play from the S-Video device:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select S-Video, then press ENTER.
Note: You can also press VIDEO one or more times to select S-Video.
3 Turn on the S-Video device, then set it to the correct mode. Refer
to the instructions that came with the S-Video device.
S-Video device
S-Video cable

Connecting a computer

Note: If your computer has an HDMI connection, you will get better
quality using the HDMI connection. For more information, see
"Connecting an HDMI device" on page 11.
To connect a computer:
1 Connect one end of a VGA cable (not included) to the VGA PIC
jack on the back of the TV, then connect the other end of the
cable to the VGA jack on the computer.
Audio cable
VGA cable
2 Connect one end of an audio cable (not included) to the
VGA AUDIO jack on the back of the TV, then connect the other
end of the cable to the AUDIO OUT jack on the computer.
To play video from the computer:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select VGA, then press ENTER.
3 Turn on the computer, then adjust the computer display
properties as needed.
Making connections
Back of TV
Computer