Connecting Headphones; Connecting An Audio Amplifier; Turning On Your Tv For The First Time - Dynex DX-L32-10A User Manual

Turning on your TV for the first time

Connecting headphones

Warning: When using headphones, adjust the headphone volume to
avoid excessively loud volume which can damage your hearing.
To connect headphones:
• Plug the headphones (not included) into the
jack on the side of the TV.

Connecting an audio amplifier

You can connect the TV to an audio amplifier to play the TV audio
through external speakers.
To connect an audio amplifier:
• Connect one end of an audio cable to the AUDIO OUT jacks on
the back of the TV, then connect the other end of the cable to the
AUDIO IN jacks on the audio amplifier.
Back of TV
Audio amplifier
Note: Cable connectors and jacks are often color-coded. Match the colors
when you connect the AV cable.
To play the TV audio system through the audio amplifier:
1 Turn on the TV, then select a program.
2 Turn on the audio amplifier, then adjust the volume and other
audio settings using the amplifier controls.
(headphone)
Audio cable
Turning on your TV for the first
time
To configure your TV:
1 Make sure that you have inserted the batteries in the remote
control, connected the antenna to the TV, and connect the AC
power.
2 Press (Power), then wait several seconds. The initial Setup
Wizard screen opens (only the first time you turn on your TV).
3 Press or to highlight Menu Language, then press
to select the menu language you want.
4 Press to highlight Time Zone, then press
your time zone.
5 Press to highlight DST (Daylight Saving Time), then
press or to select On (to automatically change the time for
Daylight Saving Time), or Off (to ignore it or set it yourself).
13
or
or to select