Adjusting The Volume; Adjusting Basic Settings; Displaying Additional Information; Adjusting The Picture - Dynex DX-L32-10A User Manual

16
Digital sub-channels
A digital TV signal transmits more data than an analog signal. This
increase in data provides a better picture and sound with less static and
interference. The increased data capacity also lets broadcasters fit
several channels into the same bandwidth as an analog signal.
Broadcasters may use these sub-channels to transmit a variety of
information, such as weather forecasts, foreign languages, and
commercials. A digital sub-channel is indicated by the main channel
number, followed by a dot, then the sub-channel number. For example,
5.1 indicates sub-channel 1 of main channel 5.

Adjusting the volume

To adjust the volume:
• Press VOL+ or VOL– to increase or decrease the volume.
• Press MUTE to temporarily turn off all sound. Press MUTE again
to restore the sound.

Adjusting basic settings

To adjust basic settings:
1 Press MENU. The on-screen menu opens with the Picture menu
displayed.
2 Press or to highlight Setup, then press . The Setup menu
opens.
Parental Controls
3 Press or to highlight an option, then press ENTER to enter
the sub menu. You can select:
• Parental Controls—Lets you control which
programs/movies your children can watch, based on industry
ratings.
• Time—Lets you set the clock and the sleep timer.
• Closed Caption—Lets you turn closed captioning on or off.
Also lets you set closed caption options.
• Menu Settings—Lets you set menu language and menu
transparency.
• VGA Settings—Lets you adjust picture settings to optimize
a computer display.
• Input Label—Lets you label a device connected to your
TV's input jacks.
• Restore Default—Lets you reset most TV settings for the
current source to factory default values.
• Audio Only—Lets you turn off the TV picture and listen to
audio only.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.

Displaying additional information

To display additional information:
1 Press INFO to show an information banner. The information
banner shows current program information such as channel
number, video input source, and resolution.
• Digital mode information—Displays channel number,
station name, channel label (if preset), broadcast program
name, TV rating, signal type, audio information, resolution,
CC mode, current time, and current program start and end
times.
• Analog mode information—Displays channel number,
channel label (if preset), signal type, audio information, and
resolution.
2 Press GUIDE to show the digital program guide, which may show
a list of available programs, program times, and program
summaries, depending on the information provided by the
broadcaster.

Adjusting the picture

Adjusting the TV picture

To adjust the picture:
1 Press MENU. The on-screen menu opens with the Picture menu
displayed.
Adjusting the picture