DX-32L-37L-46L150A11_09-0919.book Page 17 Tuesday, November 24, 2009 11:42 AM
Changing channel settings
Playing TV audio only
You can turn off the picture on your TV and listen to only the program
audio.
To play only the TV audio:
1 Press MENU. The on-screen menu opens.
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
2 Press or to highlight Setup, then press . The Setup menu
opens.
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
3 Press or to highlight Audio Only, then press or to
select On.
4 Press EXIT to close the menu. After pressing EXIT, the picture will
turn off in approximately 5 to 10 seconds.
Notes:
Audio Only works only when the input source is TV and your TV is
receiving a broadcast signal.
To exit Audio Only mode, press any button. When you exit Audio Only
mode, the Audio Only option is automatically reset to Off.
Picture
Audio
Setup
Channel
Custom
70
40
60
0
50
30
Select
Exit
MENU
Picture
Audio
Setup
Channel
On
Select
MENU
Exit
DX-32L/37L/40L/46L
Changing channel settings
Automatically scanning for channels
To auto scan for channels:
1 Press MENU. The on-screen menu opens.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
2 Press or to highlight Channel, then press . The Channel
menu opens.
Picture
TV Source
Auto Scan
F avorites
Show/Hide
Channel No.
Channel Label
WGBH-SD
DTV Signal:
Move
Select
3 Press or to select Antenna or Cable, depending on your
setup.
4 Press or to highlight Auto Scan, then press ENTER. A
confirmation box opens.
Press "ENTER" Key to Select
5 Press or to select Yes, then press ENTER to start the scan. A
progress box shows the progress of the scan.
17
Audio
Setup
Channel
Custom
70
40
60
0
50
30
Select
Exit
MENU
Audio
Setup
Channel
Antenna
2.1
Normal
MENU
Exit