Connecting An Antenna, Cable Tv, Or Satellite Tv Box; Connecting A Vcr - Dynex DX-L32-10A User Manual

10
Connecting an antenna, cable TV, or
satellite TV box
To connect an antenna, cable TV, or satellite TV box:
• Connect one end of a 75-Ohm, coaxial cable to the RF jack on the
back of the TV, then connect the other end of the cable to the
antenna or cable TV wall jack.
Antenna, cable TV, or
satellite RF jack
Notes:
• We recommend using a 75-Ohm, coaxial cable to reduce interference
and noise that may be caused by radio wave transmissions.
• Do not bundle the coaxial cable with the power cord or any other
cables.
• If you are using an antenna and reception is not good, contact a
service technician to adjust the antenna.
Back of TV
75-Ohm coaxial cable

Connecting a VCR

Note: If the VCR has an S-Video jack, connect the VCR using the S-Video
jack. S-Video provides better video than standard AV. For more
information, see "Connecting an S-Video device" on page 12.
To connect a VCR:
• Connect one end of a standard AV cable (not included) into the
AV1 IN jacks on the back of the TV, then connect the other end of
the cable to the AV OUT jacks on the VCR.
Back of TV
AV cable
Note: Cable connectors and jacks are often color-coded. Match the colors
when you connect the AV cable.
To play the VCR:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select AV1, then press ENTER.
Note: You can also press VIDEO one or more times to select AV1.
3 Turn on the VCR, insert a videotape, then press PLAY on the VCR.
Making connections
VCR