Playing Tv Audio Only; Changing Channel Settings; Automatically Scanning For Channels - Dynex DX-32L221A12 User Manual

22
DX-32L221A12/DX-40L260A12

Playing TV audio only

You can turn off the picture on your TV and listen to the program audio
only.
To play TV audio only:
1 Press MENU. The on-screen menu opens.
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Move Select
Adjust settings to affect picture quality
2 Press or to highlight CHANNELS, then press . The
CHANNELS menu opens.
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
Channel Strength
Audio Only
Auto Zoom
Move Select
Adjust channel options
3 Press or to highlight Audio Only, then press ENTER.
4 Press or to select On.
5 Press MENU to return to the previous menu, or press EXIT to
close the menu. The picture turns off in approximately 3 to 5
seconds.
Notes
• Audio Only works only when the input source is
TV and your TV is receiving a broadcast signal.
• To exit Audio Only mode, press any button.
When you exit Audio Only mode, the Audio
Only option is automatically reset to Off.

Changing channel settings

Automatically scanning for channels

When you scan for channels, your TV searches for channels with signals
and stores the channel information in the channel list. When you press
CH + or CH –, your TV goes to the next or previous channel in the
channel list.
If the TV signal source changes, for example you change from an
outdoor antenna to cable TV (no box), you need to scan for channels.
PICTURE AUDIO SETTINGS CHANNELS
Energy Savings
50
50
58
0
+10
43
Back Exit
Menu Exit
PICTURE AUDIO SETTINGS CHANNELS
Off
On
Back Exit
Menu Exit
To automatically scan for channels:
1 Press MENU. The on-screen menu opens.
PICTURE
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Move Select
Adjust settings to affect picture quality
2 Press or to highlight CHANNELS, then press . The
CHANNELS menu opens.
PICTURE
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
Channel Strength
Audio Only
Auto Zoom
Move Select
Automatically search for channels.
3 Press or to highlight Auto Channel Search, then press
ENTER. The CHANNELS-Choose Your TV Source screen opens.
Choose Your TV Source
Antenna
Cable
Cable/Satellite Box
Scanning for digital channels
Channel scan may take 20+ minutes
4 Press or to highlight Antenna, Cable, or Cable/Satellite
Box, then press ENTER.
• If you are using an antenna for a standard or HD TV signal,
select Antenna.
• If your cable is connected directly to the TV (using no tuner
box), select Cable.
• If your cable is connected to your TV through a tuner box,
select Cable/Satellite Box.
• If you selected Antenna or Cable, your TV searches
automatically for available channels in your area and stores
the channel information in the channel list. This may take
several minutes. While searching, the TV displays a progress
report.
Or,
If you selected Cable/Satellite Box, the channel search is
not necessary.
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
Changing channel settings
AUDIO SETTINGS CHANNELS
Energy Savings
50
50
58
0
+10
43
Back Exit
Menu Exit
AUDIO SETTINGS CHANNELS
Off
On
Back Exit
Menu Exit
Setup Wizard
0 Digital Channels
0 Analog Channels
Exit
Exit