Selecting The Signal Source; Hiding Channels - Dynex DX-L32-10A User Manual

20
4 Press or to highlight Auto Scan, then press ENTER. A
confirmation box opens.
5 Press or to select Yes, then press ENTER to start the scan. A
progress box shows the progress of the scan.

Selecting the signal source

To select the signal source:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Channel, then press . The Channel
menu opens.
3 Press or to select Air or Cable.
4 Press EXIT to close the menu.

Hiding channels

You can delete channels from the channel list so that your TV skips the
channels when you press CH /CH . You can still tune to the hidden
channel by using the number buttons.
To hide a channel:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Channel, then press . The Channel
menu opens.
3 Press or to highlight Show/Hide, then press ENTER. The
channel list opens.
4 Press or to highlight the channel you want to hide (the
default is to show the channel), then press ENTER to remove the
check mark from the channel.
Note: If the list has more than one page, press
the pages.
5 Press EXIT to close the menu.
Changing channel settings
or to scroll through