Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control - Dynex DX-L32-10A User Manual

8
No. Button Description
18 CH Press to go to the next or previous
/ CH
channel in the channel list. For more
information, see "Automatically
scanning for channels" on page 19
and "Selecting a channel" on
page 15.
19 MUTE Press to mute the sound. Press again
to restore the sound.
20 INFO Press to display the information
banner. For more information, see
"Displaying additional information"
on page 16.
21 EXIT Press to close the on-screen menu.
22 SLEEP Press to set the sleep timer. For more
information, see "Setting the sleep
timer" on page 28.
23 CH-LIST Press to open the channel list. For
more information, see "Automatically
scanning for channels" on page 19.
24 PICTURE Press to select the picture mode. For
more information, see "Adjusting the
TV picture" on page 16.
25 AUDIO Press to select the audio mode. You
can select News, Music, Movie, or
Custom. For more information, see
"Adjusting the sound" on page 18.

Using the remote control

Installing remote control batteries

To install remote control batteries:
1 Press down on the battery compartment cover lock, then remove
the remote control cover.
2 Insert two AAA batteries into the battery compartment. Make
sure that the + and – symbols on the batteries match the +
and – symbols in the battery compartment.
3 Replace the cover. Make sure that the lock snaps into place.
Battery precautions:
• Dispose of batteries as hazardous waste.
• Make sure that the + and – symbols on the batteries align with the
+ and – symbols in the battery compartment.
• Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can
shorten the life of new batteries and can cause old batteries to leak.
• Remove batteries as soon as they become inoperable. Chemicals that
can leak from the batteries can cause a rash. If the batteries leak,
clean the battery compartment with a cloth.
• If the remote control is not used for an extended period of time,
remove the batteries.
• Do not expose batteries to excessive heat such as sunshine, fire, or
other heat sources.

Aiming the remote control

To use the remote control:
• Point the remote control towards the remote sensor on the front
of your TV.
16.4 ft. (5 M)
Notes:
• Do not expose the remote control to shock or liquids.
• Do not use the remote control in an area with high humidity.
• Do not place the remote control in direct sunlight.
• Do not place objects, such as furniture, between the remote control
and the remote sensor.
• The remote control may not work if direct sunlight or bright light
shines on the remote sensor. Either move your TV or change the angle
at which you use the remote control.
Using the remote control