Remote Control 1 - Dynex DX-26L100A13 User Manual

6
DX-26L100A13
# Item
9 HDMI1/HDMI2/HDMI3
10 USB

Remote control 1

# Button Description
Press to turn your TV on or off (Standby
mode). When your TV is off, power still flows
1
(Power)
into it. To disconnect power, unplug the
power cord.
Press to enter a digital sub-channel number.
.
2 For more information, see "Selecting a
(Dot)
channel" on page 20.
Description
Connect HDMI devices to these jacks.
An HDMI cable carries both video and
sound. You do not need to make an
audio connection for an HDMI device.
For more information, see
"Connecting a DVD or Blu-ray player"
on page 12, or "Using HDMI" on
page 12.
Connect a USB flash drive to this port.
For more information, see
"Connecting a USB flash drive" on
page 16.
# Button Description
Press to select the picture mode. You can
select Vivid, Standard, Energy Savings, or
3 PICTURE
Custom. For more information, see
"Adjusting the TV picture" on page 21.
Press to select an audio mode. For more
4 AUDIO information, see "Adjusting sound settings"
on page 22.
Press to open the INPUT SOURCE list, then
press
5 INPUT
For more information, see "Selecting the
video input source" on page 19.
6 VOL+/VOL– Press to increase or decrease the volume.
Press to turn closed captioning on or off. You
can select On, Off, or CC On When Mute.
7 CCD
For more information, see "Turning closed
captioning on or off" on page 29.
8 CH-LIST Press to open the channel list.
9 ENTER Press to confirm selections or changes.
10 MENU Press to open the on-screen menu.
Press to mute the sound. Press again to
MUTE
11
restore the sound.
Press to enter channel numbers and the
12 Numbers
parental control password.
13 RECALL Press to go to the last viewed channel.
Press to set the sleep timer. For more
14 SLEEP information, see "Setting the sleep timer" on
page 31.
In analog TV mode, press to select Stereo,
15 MTS/SAP Mono, or SAP. For more information, see
"Adjusting sound settings" on page 22.
Press to display TV status information, such
as the channel number, channel name (if
16 INFO available), or signal source. For more
information, see "Viewing program
information" on page 21.
Press to go to the next or previous channel
17 CH+ / CH– in the channel list. For more information, see
"Selecting a channel" on page 20.
Press to select the aspect ratio. For more
18 ZOOM information, see "Adjusting the TV picture"
on page 21.
Press to open the Favorites channel list. For
more information, see "Setting up a favorite
19 FAV
channel list" on page 25 and "Viewing a
favorite channel" on page 25.
Press to navigate through the on-screen
20
menus and adjust settings.
21 EXIT Press to close the on-screen menu.
TV components
or to select a video input source.