Installing The Printer Driver In A Network Environment; Installing The Pcl Printer Driver - Ricoh C222DN - Aficio SP Color Laser Printer Software Manual

Installing the Printer Driver in a Network
Environment
This section explains how to install the printer driver that allows you to use this
printer in a network environment.

Installing the PCL Printer Driver

The following four steps are required to use this printer in the network environ-
ment.
A Print the test page
B Install Smart Organizing Monitor
C Specify the printer's IP address
D
Install the printer driver
Printing a test page
To install the printer driver, you must first specify the printer's IP address.
Before specifying it, you must obtain the printer's MAC address, which is print-
ed on the test page.
A
Turn the printer's power switch to off, and then wait a few seconds.
B
While pressing down the {Job Reset} key, turn the printer's power switch
back to on, and then keep the key pressed down until the Alert indicator
flashes once.
C
Printing starts when the printer is fully warmed up.
Installing Smart Organizing Monitor
You can specify the printer's IP address using Smart Organizing Monitor.
Smart Organizing Monitor can be installed from the CD-ROM provided with
this printer.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [OK].
The default interface language is English.
D
Click [Smart Organizing Monitor].

Installing the Printer Driver in a Network Environment

1
3