Troubleshooting USB
Problem
The printer is not recognized auto-
matically.
Windows has already configured
the USB settings.
Solutions
Turn off the power of the printer, reconnect the USB cable,
and then turn it on again.
Open Windows' Device Manager, and then, under [Univer-
sal Serial Bus controllers], remove any conflicting devices.
Conflicting devices have a [!] or [?] icon by them. Take
care not to accidentally remove required devices. For de-
tails, see Windows Help.
When using Windows 2000/XP/Vista or Windows Serv-
er 2003/2003 R2, an erroneous device is displayed under
[USB Controller] in the [Device Manager] dialog box.
Installing the Printer Driver Using USB
1
15